An often critical feature for any electrical component, of course for safety edges, too, is sealing. Ingress of humidity or water may lead to failures. Critical for sealing, in a safety edge, is the interface between rubber profile and end caps being normally glued to each other.
Welcome at the Haake GmbH web site.
Please have a look at our wide offer of bumpers:
|Haake GmbH Bumper|
The Machinery Directive states that dangerous machines may only be put into operation, if comprehensive safety measures have been taken to protect the personnel working with these machines. Our catalogue HSC Safety Edges describes the protection against risks at shearing and crushing edges by safety sensitive edges. One of these measures is for the protection of shearing and crushing edges at automatically driven devices bearing a substantial risk of injury. Bumpers are protection devices for large over-travels. They are equipped with a rubber-foam cushion with suitable surface finish and reinforced if necessary. Colours may also be applied. The components shown in the safety edge catalogue have heights up to 150 mm. Further, they are generally equipped with one Haake contact chain only. In certain applications, the power-operated devices have, due to their inertia, long stopping times and thus also large stopping travels. Examples are big and heavy doors (hangar doors), automatic-guided vehicles (AGV), theatre stages etc. In these cases, the up to 150 mm high safety edges mentioned above will not be sufficient. Here so-called bumpers are used. Their dimensions as well as the positions and number of the contact chains are specially selected and manufactured for the intended aplication.
|Bumper Buffer Personal safety systems bumber EN 954-1 safety cushion safety bumper bumper DIN ISO bumper security category 3 bumper security category 4 safety cut-off collision cushion area bumper ring bumper safety contact bumper safety buffer|